Three layers. One home.
The Holistic Home Zone Method is a complete Building Biology inspection that assesses air quality, mold, bacteria, VOCs, and EMF. The house does not separate them, and neither do we.
The house doesn't separate them.
Your body lives with all three at once.
Most mold inspections stop at mold. Most EMF assessments stop at frequencies. The HHZ Method reads the house as one integrated system because the people living in it don’t feel air, mold, and EMFs separately. One inspection. One report. Three layers.
Every finding is most often influenced by other layers. A mold problem in the primary bath might be influenced by the EMF field from a nearby breaker panel, which might interact with the air quality readings from the adjacent bedroom. The report connects those dots.
Twelve instruments. One integrated read.
Every tool below rides along on every inspection. Tap any card to see what it measures, how it fits into a Building Biology workup, and which chronic illnesses it helps surface a cause for.
Mold + air quality
Mold + moisture
EMF
One inspection. One report.
All three layers get assessed on the same visit. The final report reads as one integrated picture, not three silos stitched at the end.
What the report contains.
Twenty to eighty pages to inform a homeowner, a remediator, or a doctor.
Every report opens with a one-page executive summary: three findings ranked by priority, plus the three actions that matter most. Clients who read only that page still walk away with a plan.
The body of the report walks room by room. Moisture readings logged as a table. Thermal images annotated with what they show. EMF readings at pillow height, head of bed, foot of bed, and at each workstation or desk. Building Biology readings for CO₂, VOCs, formaldehyde, and PM2.5 captured during the walkthrough. Lab results reproduced in full with interpretation.
When findings warrant cleanup, an IICRC S520-aligned remediation protocol is included. It specifies what to remove, what to clean, what to reinstall, and what post-remediation verification will look like. You hand it to any qualified Florida remediator and they can scope the job from the document.
When findings warrant EMF mitigation, the report specifies exact interventions with cost ranges: which breakers to kill at night, which dirty-electricity filters to install and where, which walls (if any) warrant shielding paint. No product sales from HHZ so you can be sure you are getting what you need.
The pattern across Florida homes.
Rough distribution from 300-plus inspections through 2025.
About 70 percent of symptomatic Florida households we see have active or recent water damage somewhere in the home. Most of it is hidden. Shower and tub enclosures account for the largest share, followed by HVAC condensation and roof leaks.
About 40 percent of homes with solar panels show bedroom dirty-electricity readings that exceed Building Biology guidelines. The fix is almost always a set of inline filters at the bedroom outlets, not shielding.
About 30 percent of Florida bedrooms measured have at least one wiring error producing elevated electric fields. Usually a missing neutral bond or a shared neutral between circuits. The fix belongs to an electrician.
About 25 percent of gas-cooking kitchens show NO₂ readings during cooking that exceed the EPA 1-hour outdoor limit. A ducted range hood that vents outdoors resolves it in most cases.
These percentages are not predictions about your house. They’re what we find across the portfolio. Every inspection answers specifically for your home.
How to prepare the home.
Forty-eight hours of simple steps so the readings tell the real story.
- No detailed cleaning. We measure the home as you live in it. Scrubbing baseboards or HVAC returns the day before erases the findings we need.
- No candles, diffusers, or plug-ins. For 48 hours. These mask VOC readings and give false-negative air quality results.
- HVAC running normally. Same thermostat schedule, same fan mode. We want to see the system as it actually runs.
- Windows closed. For 12 hours before the visit so indoor air reaches its typical concentration.
- access. To HVAC closets, attic hatches, crawlspace, water heater, electrical panel, and any area you want specifically inspected.
- Pets secured. We work more efficiently and pets are less stressed.
- Gather documents. Any prior inspection reports, ERMI results, EMMA results, or remediation paperwork. Kit reads everything that came before.
What happens after the report.
The report is the start of the project, not the end.
For most clients, the next step after a mold finding is hiring a licensed Florida remediator. Kit maintains a short list of remediators across Florida and Georgia who work to IICRC S520 standards and do not resist third-party verification. No referral fees flow back to HHZ from any of them. You can take the protocol to any remediator you choose.
For EMF findings, the next step is usually an electrician for wiring corrections, a filter install you can do yourself with a screwdriver, or a shielding specialist for more involved mitigation. Kit flags which specialty each finding needs.
For air quality findings, the next step depends on the source: an HVAC tech for duct or humidity issues, a plumber for combustion concerns, or a furniture return if a specific product is the source. The report names names.
Post-remediation, Kit returns for a third-party verification visit at a reduced rate. This is the step most homeowners regret skipping. A verification visit catches incomplete work before the remediator has been fully paid, and it gives you defensible documentation that the problem is resolved.
Ready when you are.
Book an inspection, schedule a virtual consult, or request more information. Deb handles the scheduling so there’s a human at the other end of the phone.